To place an order click here now.

   Apollo TX 125 EN, Transmitter
   With Built in Encoder

   Description & Features:

  • 5 Watts Transmitter with the built in Encoder and S232 input5.
  • Frequency Rang: VHF =146MHz ~ 170MHz , UHF=450MHz ~ 470MHz .
  • Channel Spacing's: 12.5K /25k Hz

  • RF Output Power : Hi  : 5W/2W  Lo : 1W/0.5W/0.1W , by tuning

  • Modulation Type: F3D, F3E

  • Intermediate Frequency :45MHz & 450KHz

  • Number of Channels:16 channels ( 4 dip switch selectable )

  • Frequency Source: Synthesized

  • Power Supply : DC 10V ~ 15V, 12 V typical

  • Temperature Range :-30 C ~ 60 C

  • Current Consumption:
         
    Standby : < 50mA

          TX (5W) : < 2A

          TX (1W : < 1A

     TRANSMITTER:

  • Carrier Power:

          HI : 5W/2W +/- 0.5dB

          LOW : 1W +/- 0.5dB

  • Frequency error : +/- 5 ppm @VHF , +/- 3ppm@UHF

  • Frequency Deviation:

          25kHz Channel Spacing: 5 kHz ~ 3.8 kHz (Peak)

          12.5kHz Channel Spacing: 2.5 kHz ~ 1.8 kHz (Peak)

  • Audio Frequency Response: 100Hz ~ 2.5 kHz -6dB

  • Adjacent Channel Power: < 70dBc

  • Conducted Spurious Emission: -57dBc

     RECEIVER:

  • Sensitivity (@ 12dB SINAD) : < -115dBm
  • Adjacent Channel Selectivity:
          25kHz Channel Spacing: > 60dB
          12.5kHz Channel Spacing: > 50dB
  • Spurious Response Rejection : 70dB

  • Image Response: > 70dB

  • IF Response : > 70dB

  • Intermediation Response Rejection

          +/-25 kHz/50 kHz : 65dB

          +/-50 kHz/100 kHz : 65dB

  • AF Distortion: < 5%

  • LO Frequency Temperature Stability: < 3ppm

  • Power Jack : 2 Pins
          Power  ? +?: DC 9V ~ 15V
          Power Gnd  ?-? : Gnd

  • I/O PORT : 9 Pins

  • DB-9 Connector

         PIN.1---------PTT

         PIN.2---------TXD

         PIN.3---------RXD

         PIN.4---------Carrier DET OUT

         PIN.5---------GND

         PIN.6---------CTS

         PIN.7--------- Digital MOD IN

         PIN.8--------- Audio MOD IN

         PIN.9--------- Audio OUT

  • PTT Input Level: 0-5V (TTL)

  • Digital Modulation Input Level: 0-5V (TTL)

  • Audio Modulation Input Level: 1Vp-p @1kHz

  • Audio Output Level: 2V p-p @ 8 OHM Load

  • Carrier DET Output Level: 0-5V(TTL)

  • TX IND Output Level : 0-5V(TTL)

  • TXD & RXD Level : +/- 12V (RS-232)

     

    *Programming this device through special cable ( only 3 wire connected :TXD , RXD ,GND
    others open ) but direct RS232 level, Don't need special programming device for programming .

*PTT time out feature: 0~250 sec., Cycling PTT signal reenable RF output, 0 for disable timeout.

Phone: 800-880-9390  Fax: 866-620-2953
138 Palm Coast Parkway, N.E. Box 314, Palm Coast, FL 32137
info@pagecommusa.com